NB Norder Bandstahl GmbH

Drechslerstrasse
D-26506 Norden

Phone: +49 – 4931 – 178 – 01
FAX: +49 – 4931 – 178 – 154

Web: www.norderband.de

Quality management: Certificates

Representation in Austria since 2012

Burde & CO GmbH
Phone: +43 – 1 – 4023973 – 0
Email: service@burdeco.com

Slit strip (wound in one layer)
  • Width: 5 – 1500 mm
  • Strength: 0,1 – 8,00 mm
  • RID: 204 / 305 / 406 / 508 / 610 mm
  • RAD: by arrangement
  • Ring weight: 0,5 – 18 kg/mm bandwidth
  • Tolerance: EN ISO 9445:2006 by arrangement
Standard sheets and fixed size sheets/panels
  • Standard: 1000 x 2000 mm, 1250 x 2500 mm, 1500 x 3000 mm
  • Width / fixed size: 180 – 1500 mm
  • Length: 100 – 6000 mm
  • Strength: 0,20 – 4,00 mm
  • Tolerance: EN ISO 9445:2006 by arrangement
Bars (made of strip steel, straightened, edges rolled)
  • Width: 10 – 250 mm
  • Strength: 1,0- 6,00 mm
  • Length: max. 12000 mm
  • Tolerance: EN ISO 9445:2006 / 1017 (similar)
Edge processing
  • Thickness: 0,10 – 6,00 mm
  • Width: 3,00 – 300 mm
  • RID: 305 / 406 / 508 mm
  • RAD: max. 1700 mm

Edge:

  • cut edges (gk)
  • burr-free cut edges (gak)
  • roll-rounded edges flat-rolled (wak)
  • rolled with sharp edges / cuff band (sgk)
  • rounded edges round (sak)
Pack winding
  • spool width: 300 mm or by agreement
  • Width: 5 – 50 mm
  • Strength: 0,10 – 6,00 mm
  • RID: 305 / 406 / 508 mm
  • RAD: by arrangement
  • Ring weight: 250 – 1250 kg
  • Tolerance: EN ISO 9445:2006

Technical possibilities

Stainless steels EN 10088-2
Material
No.:		  Abbreviation  ASTM Type England
BS		 France
AFNOR		 Sweden
SIS		 Japan
JIS
1.4016* X6Cr 17 430 430 S 17 Z 8 C 17 2320 SUS 430
1.4021 X20Cr 13 (420) 420 S 37 Z 20 C 3 2303 SUS 420 J1
1.4031 X39Cr 13 (420) 430 S 45 Z 33 C 132 2303 SUS 420 J2
1.4034 X45Cr 13 (420) Z 44 C 14
1.4113* X6CrMo 17-1 434 434S17 Z 8 CD 17 -01 SUS 343
1.4301* X5CrNi 18-10 304 304 S 31 Z 7 CN 18-9 2332/33 SUS 304
1.4303* X4CrNi 18-12 (305) 305 S 19 Z 8 CN 18-12 SUS 305
1.4306* X2CrNi 19-11 304L 304 S 11 Z 3 CN 18-10 2352 SUS 304L
1.4307* X2CrNi 18-9 304L
1.4310* X10CrNi 18-8 (301) 301 S 21 Z 11 CN 17-08 2331 SUS 301
1.4311 X2CrNiN 18-10 304LN 304 S 61 Z 3 CN 18-10 AZ 2371 SUS 304L
1.4401* X5CrNiMo 17-12-2 316 316 S 31 Z 7 CND 17-12-02 2347 SUS 316
1.4404* X2CrNiMo 17-12-2 316L 316 S 11 Z 3 CND 17-12-02 2348 SUS 316L
1.4435* X2CrNiMo 18-14-3 316L 316 S 13 Z 3 CND 17-13-03 2353 SUS 316L
1.4436* X3CrNiMo 17-13-3 316 316 S 33 Z 6 CND 18-12-03 2343 SUS 316
1.4438 X2CrNiMo 18-15-4 317L Z 3 CND 19-15-04 2367 SUS 317L
1.4462 X2CrNiMoN 22-5-3 318 S 13 Z 3 CND 22-05-AZ 2377 SUS 329J3L
1.4509* X2CrTiNb 18 441 Z 3 CTNb 18
1.4510* X3CrTi 17 439 Z 4 CT 17 SUS 430LX
1.4511* X8CrNb 17 430Cb
1.4512* X2CrTi 12 409 409 S 19 Z 3 CT 12 SUS 409
1.4520 X2CrTi 17
1.4521* X2CrMoTi 18-2 444 SUS 444
1.4539* X1NiCrMoCuN25-20-5 904 S 13 Z 2 NCDU 25-20 2662
1.4541* X6CrNiTi 18-10 321 321 S 31 Z 6 CNT 18 -10 2337 SUS 321
1.4571* X6CrNiTi 17-12-2 316Ti 320 S 31 Z 6 CNDT 17-12 2350 SUS 316 Ti
1.4713 X10CrAl 7 Z 8 Ca 7
1.4828* X15CrNiSi 20-12 (309) S 94
1.4841* X15CrNi’Si 25-20 (310) S 24 Z 12 CNS 25-20 2361
1.4845 X12CrNi 25-21 (310S) S 24 2361
1.4878* X12CrNiTi 18-9 (321) S 20 2337

*qualities available in stock

Surface finishes EN 10088-2

hot rolled

Abbreviation  Type of execution Surface finish DIN 17440 / DIN 17441*
1U thermoformed, not heat treated, not descaled Mill scale a1
1C hot formed, heat treated, not descaled Mill scale b (Ic)
1E thermoformed, heat treated, mechanically descaled scale free c1 (IIa)
1D thermoformed, heat treated, pickled scale free c2 (IIa)
1X thermoformed, heat treated, pre-machined metallic clean e

 

cold rolled

Abbreviation  Type of execution Surface finish DIN 17440 / DIN 17441*
2H work hardened blank f (IIIa)
2C work hardened, heat treated, not descaled smooth, heat treatment scale
2E work hardened, heat treated, mechanically descaled rough, dull
2D cold processed, heat treated, pickled smooth h (IIIb)
2B heat treated, machined, mechanically smoothed smoother than 2D n (IIIc)
2B cold rolled, heat treated, pickled, cold rolled smoother than 2D n (IIIc)
2R cold rolled, bright annealed reflecting m (IIId)
2Q cold-rolled, hardened and tempered, scale-free scale free

 

Special designs

Abbreviation Type of execution Surface finish DIN 17440 / DIN 17441*
1G / 2G polished O (IV)
1J / 2J brushed or matt polished Q
1K / 2K satin polished
1P / 2P polished, polished P (V)
2F cold rolled, heat treated,
skin-pass rolled with roughened rolls		 mat P (V)
1M / 2M patterned
2W wavy
2L inked
1S / 2S surface coated